Cleaning and Maintenance
53
EN
End of the Vapor Clean cycle
At the end
appears on the
display and a buzzer will sound that can be
deactivated by pressing the temperature
knob.
1. Press and hold the function knob for at
least 3 seconds to exit the function.
2. Open the door and wipe away the less
stubborn dirt with a microfiber cloth.
3. Use an anti-scratch sponge with brass
filaments on tougher encrustations.
4. In case of grease residues use specific
oven cleaning products.
5. Remove the residual water inside the
oven.
For greater hygiene and to avoid food
being affected by any unpleasant odors,
we recommend that the oven is dried using
a fan-assisted function at 320°F for
approximately 10 minutes.
CLEAN: reservoir cleaning
1. Press and turn the function knob to select
the
CLEAN
function.
2. Press the function knob to confirm your
choice of function. The display will show
a request to fill the reservoir.
3. Fill the jug provided (or a container) with
a solution of water and citric acid.
We recommend wearing rubber
gloves for these operations.
For easier manual cleaning of
parts that are difficult to reach, we
recommend removing the door.
To guarantee optimum
performance of your appliance,
we recommend cleaning the
reservoir every 2-3 months.
We recommend mixing 30 g of
citric acid with 1.5 liters of water.
