Cleaning and maintenance
23
EN
Removing rack/tray support frames
Removing the guide frames enables the
sides to be cleaned more easily. This
operation should be performed each time
the automatic cleaning cycle is used (on
some models only).
To remove the guide frames, pull the frame
towards the inside of the oven cavity to
unhook it from its groove
A
, then slide it out
of the seats at the back
B
.
When cleaning is complete, repeat the
above procedures to put the guide frames
back in.
Cleaning the top of the oven cavity
The appliance is equipped with a tilting grill
element that allows for easy cleaning of the
upper part of the oven compartment.
1. Free the upper heating element by gently
lifting it and rotating its retaining latch by
90 degrees.
2. Gently lower the heating element until it
stops.
3. When you have finished cleaning, place
the heating element back in position and
turn the retaining latch to lock it in place.
High temperature inside the oven
during use
Danger of burns
• The following must only be carried out
when the oven is completely cold and
switched off.
Improper use
Risk of damage to the appliance
• Do not excessively flex the element
during cleaning.
