Smeg SFA106N, Оригинальное руководство пользователя, Страница: 34 / 48

Cleaning and maintenance
36
On pizza models only:
Remove in sequence the pizza stone
cover (
1 ) and the base ( 2 ) on which it is
placed. The base has to be raised a few
millimetres and then removed by pulling it
outwards.
Lift the end of the bottom heating element ( 3 )
a few centimetres and clean the bottom of
the oven cavity.
Put the pizza stone base back in place,
pushing it in until it is against the back of the
oven cavity, and push it down so that the
heating element plate fits into the base itself.
Cleaning the top of the oven cavity (on
some models only - not on pyrolytic
models)
The appliance is equipped with a tilting grill
element that allows the upper part of the
oven cavity to be cleaned easily.
1. Slightly raise the roof heating element
and rotate the retaining latch by 90° in
order to release the heating element.
2. Carefully lower the heating element until
it stops.
3. When you have finished cleaning, place
the heating element back in position and
turn the retaining latch to lock it in place.
High temperature inside the oven
during use
Danger of burns
• The following must only be carried out
when the oven is completely cold and
switched off.
Improper use
Risk of damage to the appliance
• Do not excessively flex the element
during cleaning.