Cleaning and maintenance
106
3. Press the control knob twice to start the
cleaning cycle.
4. A buzzer will indicate the end of the
vapor clean cycle.
Setting timed vapor clean
It is possible to program the vapor clean
start time, like any cooking function.
1. After selecting the vapor clean special
function, press the control knob. The
display shows the current time and the
symbol comes on.
2. Turn the control knob to set the time you
wish vapor clean to finish.
3. After a few seconds, the
and
symbols remain lit steadily and the
appliance waits for the set start time to
start the cleaning cycle.
End of the Vapor Clean cycle
1. Open the door and wipe away the less
stubborn dirt with a microfibre cloth.
2. Use an anti-scratch sponge with brass
filaments on tougher encrustations.
3. In case of grease residues use specific
oven cleaning products.
4. Remove the water left inside the oven.
For improved hygiene and to avoid food
being affected by any unpleasant odours,
we recommend that the oven is dried using
a fan assisted function at 160°C for
approximately 10 minutes.
We recommend wearing rubber
gloves for these operations.
For easier manual cleaning of the
parts difficult to reach, we
recommend removing the door.
