Instructions for the User
41
8.3 Switching on the hob and the cooking zone
To activate the control described here, after pressing one (selection) button, you need to press another
one
afterwards
.
The second button needs to be pressed
within 10 seconds
, as otherwise the desired selection will be
deactivated.
1 Press the
on/off button
until the power level indicators show "0". The function lights will flash. The
control is then ready for use.
2 Then press a
button to select the cooking zone
(e.g.
for the rear left zone). The function light for
the selected cooking zone will come on.
3 Select the cooking level using the
button (
selection/increase
) or
(
decrease
). By selecting the
button, cooking level 1 is activated; by selecting the
button, level 9 is activated.
4 Place a
metal saucepan
on the cooking zone. Saucepan recognition will activate the induction coil.
No power is transmitted to the cooking zone until a metal saucepan is placed on it.
To cook on other cooking zones at the same time, repeat the steps in points 2 to 4.
When applying radiant heat, the cooking utensils must not have magnetic properties (proceed as
detailed in points 2 and 3).
8.4 Switching off the cooking zone
5 The function light for the selected cooking zone must be lit. If necessary, activate the
cooking zone
selector
.
6 a) Press the
button until cooking level "0" is shown, or:
b) Press the
and
buttons at the same time. The cooking zone can be switched off regardless of
the power level setting, or:
c) Select the
on/off button
. The entire hob/all the cooking zones will turn off.
8.5 Switching off the hob
7 Press the
on/off button
. The hob will be completely deactivated regardless of the active settings.
8.6 STOP function
The cooking process can be paused briefly using the STOP function (e.g. to go and answer the
telephone). To reinitiate the cooking process at the same power level, you need to deactivate the STOP
function. If the timer was set, it stops and then restarts from the point where it stopped.
For safety reasons, this function is only available for 10 minutes, after which the hob turns off.
1. The cooking utensils are on the cooking zone and the desired power levels have been set.
2. Press the
STOP button
. The
symbol is displayed instead of the selected power level.
3. The function is deactivated first of all by pressing the
STOP button
then
another button of your
choice
(apart from the on/off button). The second button must be pressed within 10 seconds as
otherwise the hob will turn off.
