background image

24

224811

Parboiling boost

Switch on the cooking zone by means of corresponding
cooking zone button 

!

. Press the minus key 

 and select

cooking level 9. Then switch on the parboiling boost by means
of the plus key 

. During the parboiling stage, the cooking

level display 

#

 switches continuously between the “A” sign

(parboiling boost) and the cooking level which has been set.
Now you can select the subsequent cooking level 1–8. If you
quit cooking level 9 without selecting a subsequent cooking
level from 1–8, then the parboiling boost is shut off
automatically after 10 seconds. The parboiling boost time
depends on the subsequent cooking level which has been
selected; details are given in the enclosed time table.

If the plus key 

 is selected after the required subsequent

cooking level has been selected, the parboiling boost time is
adjusted upwards in accordance with the time chart. If the
minus key 

 is pressed after the required subsequent cooking

level has been deselected, the parboiling boost is stopped beforehand.

Switching on the second element (if existing)

Two-circuit connection of the respective cooking zone can only be effected after the corresponding cooking zone
has been activated and switched on. Switch on the second heating element by means of the second element key

 

. The control lamp 

"

 lights up. The outer element is switched on. To switch off, the two-circuit cooking zone must

be activated and the two-circuit key 

 

 operated. The control lamp 

"

 goes out, the outer element is switched off.

Timer (if existing)

The timer can be used to automatically switch off a cooking zone after a pre-set time of between 1 and 99 minutes.
The required cooking zone must be activated, stand-by dot 

$

 lights up. Select a cooking level from 1 to 9 by

means of the minus or plus keys 

/

. Then press timer key 

. The timer display 

 shows “00”. Select the

required cooking time between 01 and 99 minutes by means of the Minus or Plus key 

/

. The control lamp 

of the selected cooking zone lights up.

The selected cooking time can be altered at any time. Activate the relevant cooking zone, press timer key 

 and

change the cooking time by means of the Minus or Plus keys 

/

.

When the pre-set cooking time has finished, the cooking zone switches off automatically and an acoustic signal
sounds for two minutes. This can be switched off by pressing any key.

If you want to switch the timer off beforehand, press cooking zone key 

!

 and timer key 

. The minus key 

 can

now be used to set the timer 

 to “00”, or alternatively this can be done by simultaneously pressing the minus and

the plus keys 

+

.

The timer can also be used as an egg timer when none of the cooking zones are activated. In this case, no cooking
zone should be activated when the timer 

 is being set (the cooking zone stand-by dot 

$

 does not light up).

Table of times

PB

= Parboiling boost, 

time in minutes, seconds

Cooking level

PB (min:sec)

1

01:00

2

03:00

3

04:48

4

06:30

5

08:30

6

02:30

7

03:30

8

04:30

9

—:—

Содержание SE2664TCX












Отзывы: