Smeg SE264TD, Инструкция по установке и эксплуатации

Страница: 13 / 21

Touch the timer control, the timer indicator show “10”
Adjust the timer setting by touch the “-” or “+” control. The
minute minder indicator will start flashing and will show in the
timer display.
Touching the “-” and “+” together, the timer is cancelled, and the
“--” will show in the minute display.
When the time is set, it will begin to count down immediately. The
display will show the remaining time and the timer indicator will
flash for 5 seconds
Setting the timer to turn more than one cooking zone off
1. If more than one heating zone use this function, the timer indicator will show the lowest time.
(e.g. zone 3# setting time of 10minutes, zone 4# setting time of 5 minutes, the timer indicator shows
“5”.)
NOTE: The red dot next to power level indicator will flash
(set to 10 minutes)
(set to 5 minutes)
min. timer and the dot of corresponding zone will flash.
cooking zone will be switch off automatically.
Note:
a) The red dot next to power level indicator will illuminate indicating that zone is selected.
2. Once the countdown timer expires, the corresponding zone will switch off. Then it will show the new
3. When cooking timer expires, the corresponding
EN-10