Smeg SE2642TC, Инструкции по монтажу и использованию

Страница: 3 / 10

12 223175
1. Operations
1.1 Your new hob with Touch-Control operation
SE2644TC SE2642TC SE2645TC SE2756TC
Cooking zone 14.5 cm 14.5 cm 14.5 cm 18 cm
(Two-circuit) cooking zone 12/18 cm 18 cm 12/18 cm 12/21 cm
Cooking zone 14.5 cm 14.5 cm 14.5 cm 14.5 cm
(Two-circuit) cooking zone 18/21 cm 21 cm 18/21 cm 18/26.5 cm
Fryer
1.2 Touch-Control operating panel
After the supply voltage has been connected (mains connection), a self-test is carried out which is concluded when
a short acoustic signal is to be heard.
1
On/off switch (control)
2
Locking key
3
Control lamp lock (control)
4
Timer key
5
Time display
6
Timer control lamp
7
Minus key
8
Plus key
9
Twin circuit key
0
Cooking zone key
!
Control lamp for switching on the twin circuit
"
Cooking level display
§
Readiness point for cooking zone
(lit: cooking zone can be used)
1.3 Touch-Control operations
Each key operation is always confirmed by an acoustic signal.
Pressing the on/off switch key
1
switches on the control system: Put your finger on the button until a "0" lights up
at all of the cooking level displays and the cooking zone standby dot
§
flashes. The next action must be carried
out within ten seconds, otherwise the control system will automatically switch off again.
To switch on a cooking zone, press the corresponding cooking zone key
0
of the required cooking zone. The
appropriate stand-by dot cooking zone
§
of the activated cooking zone lights up.
Select a cooking level from 1 to 9 by means of the minus or plus keys
7
/
8
. When switched on, each cooking zone
can be switched off again at any time. To do this, the required cooking zone must be activated, the stand-by dot
§
lights up.
The minus key
7
can be used to turn the cooling level down to "0"; if the minus and plus keys
7
+
8
are pressed
at the same time, the cooling level can be switched off directly.
In all cases the complete control system can be switched off at any time by pressing the on/off key
1
: To switch
off the entire cooking range place your finger briefly on the on/off switch until the control lights go out.
Pressing locking key
2
prevents all the keys - with the exception of the on/off key - from being operated by
mistake. Successful locking is indicated by the control lamp
3
. Pressing the locking key
2
cancels this command
again.
Residual heat display
The residual heat display is an illuminated "H" on the appropriate cooking level display
"
.