Instructions for the user
73
Do not spray excessive amounts of the water and washing up liquid solution.
We recommend spraying approx. 20 times at the most.
• Close the door and set the assisted cleaning cycle.
9.7.2 Setting the assisted cleaning cycle
Once the preparations have been made for the assisted cleaning cycle, proceed
as follows:
• turn the oven function knob and the oven thermostat knob to
for the
Vapor Clean function;
• set a cooking time of 15 minutes using the timer control knob;
• at the end of the assisted cleaning cycle, the timer will deactivate the oven
heating elements.
9.7.3 End of the assisted cleaning cycle
The water remaining at the end of the assisted cleaning cycle cannot be left
inside the oven for long (for example overnight).
You are advised to wear a pair of gloves during these processes.
At the end of the cleaning cycle, open the door and wipe away the less stubborn
dirt with a microfibre cloth. Use an anti-scratch sponge with brass filaments on
tougher encrustations.
We recommend removing the door as described in “10.2 Removing the door” to
facilitate access to restricted spaces.
For improved hygiene and to avoid food being affected by any unpleasant
odours, we recommend that the oven is dried using a fan function at 160°C for
approximately 10 minutes. To set the function, see “6. FRONT PANEL”.
