Instructions for the installer
77
11.6 Positioning the oven
Never use the oven door to lever the oven into place when fitting. Avoid exerting
too much pressure on the oven door when open.
It is recommended to install the oven with the help of a second person.
The base on which the oven is resting must be complete as shown in the figures
below.
The oven is designed for mounting into any piece of furniture as long as it is
heat-resistant (90°C). For installing under a work top, follow the dimensions
given in paragraph “11.6.1 Positioning under a work top”. When installing in tall
units, comply with the dimensions shown in figures “11.6.2 Installing in tall
units”, bearing in mind that the top/rear of the unit must have an opening 35-40
mm deep.
For both types of installation, allow for a rear and bottom clearance
F
as shown
below.
Once the appliance is in position, remove the screw covers
Z
on the frame and
fix the oven to the unit using 2 screws. Replace the screw covers. Installing
under a work top.
Z