background image

Instructions for the user

113

The text “Piro” will appear on the display to indicate
that the oven is performing the cleaning cycle.

The time remaining to the end of the cleaning cycle
will also be shown.

Two minutes after the cleaning (pyrolysis) cycle
starts, a locking device which prevents opening of

the door will be tripped. 

 will light up to indicate

that the locking device has been activated.
At the end of the cleaning cycle the locking device
will remain active until the temperature inside the
oven has reached a safety threshold. When the oven
has cooled down, collect the residues from
automatic cleaning with a damp micro-fibre cloth.

To select a cleaning cycle with a delayed start

,

after setting the duration press 

 and the

current time will appear on the display.

Temperature zone

Press 

 or 

 to increase or decrease the time

when you want to start cooking.

Temperature zone

A few seconds after the desired duration is set, 

and 

 will stay lit, and the oven will wait for the

starting time set for the cleaning cycle.

It is not possible to select any functions once the door locking device has been

activated. Wait for 

 to go out.

If you need  to interrupt the cleaning function, switch the appliance off

completely by pressing 

 for 2 seconds.

Содержание SC115































































Отзывы: