Smeg SBS63XDF, Инструкция по эксплуатации

Страница: 14 / 31

13 / 29 EN
Refrigerator / User Guide
5 Preparation
5.1 What to do for energy saving
mehmet
A
Connecting the product to electronic
energy-saving systems is harmful, as it
may damage the product.
t
For a freestanding appliance; ‘this refrigerating
appliance is not intended to be used as a built-
in appliance’ ;
t Do not keep the refrigerator doors open for
long periods.
t Do not place hot food or beverages into the
refrigerator.
t Do not overfill the refrigerator; blocking the
internal air flow will reduce cooling capacity.
t Depending on the product's features;
defrosting frozen foods in the cooler
compartment will ensure energy saving and
preserve food quality.
t Food shall be stored using the drawers in the
cooler compartment in order to ensure energy
saving and protect food in better conditions.
t
Make sure the foods are not in contact with
the cooler compartment temperature sensor
described below.
energy while maintaining the freshness of your
foodstuff.
t In case of multiple options are present glass
shelves must be placed so that the air outlets
at the backwall are not blocked, prefably air
outlets are remaining below the glass shelf.
This combination may help impoving air
distribution and energy efficiency.
A
Read the “Safety Instructions” section first!
5.2 First operation
Before using your refrigerator, make sure the
necessary preparations are made in line with
the instructions in "Safety and environment
instructions" and "Installation" sections.
t Keep the product running without placing any
food inside for 12 hours and do not open the
door, unless absolutely necessary.
C
A sound will be heard when the
compressor is engaged. It is normal to
hear sound even when the compressor is
inactive, due to the compressed liquids
and gasses in the cooling system.
C
It is normal for the front edges of the
refrigerator to be warm. These areas are
designed to warm up in order to prevent
condensation.
C
For some models, indicator panel turns
off automatically 1 minutes after the door
closes. It will be reactivated when the door
is open or any button is pressed.
t Since hot and humid air will not directly
penetrate into your product when the doors are
not opened, your product will optimize itself
in conditions sufficient to protect your food.
In this energy saving function, functions and
components such as compressor, fan, heater,
defrost, lighting, display and so on will operate
according to the needs to consume minimum