Smeg SAR64X1, Руководство пользователя

Страница: 13 / 28

Instructions for the Installer
15
5.1 Connection to liquid gas
Use a pressure regulator and make the connection on the gas cylinder
following the guidelines established by the regulations in force. Make
sure that the feed pressure complies with the values indicated in the
table at point “5.3 Burner and nozzle characteristics table”.
5.2 Room ventilation
Caution – This hob may only be installed and operated in rooms
permanently ventilated in accordance with current regulations. For
proper operation of a gas appliance it is essential for the air necessary
for combustion of the gas to be able to flow naturally into the room. Air
must flow directly into the room through openings in its outside walls.
This (these) opening (s) must have a free passage cross-section of at
least 100 cm2, or 200 cm2 for appliances not equipped with gas safety
device. These openings must be constructed so that they cannot be
obstructed indoors or outdoors, and should preferably be close to the
floor on the side opposite to the combustion gas discharge point. If it is
not possible to make the openings in the room where the cooker is
installed, the necessary air may be taken from an adjoining room,
proveded it is not a bedroom or a room with fire risk.
5.3 Combustion discharge
Combustion gases may be discharged by means of hoods connected
to a flue with reliable natural draught, or a fan extraction system. An
effective extraction system requires careful design by an authorised
specialist, and must comply with the regulation distances and positions.
After installation, the engineer must issue a certificate of compliance.