Instructions for the installer
32
2.2
Installing the oven
The oven is designed for installation into any piece of furniture as long as
it is heat-resistant. Proceed according to the dimensions shown in Figures
1
,
2
and
3
. For installing under a work top, follow the dimensions given in
Figure
3
. For installing under a work top beneath a hob with controls
connected to the oven, ensure a minimum clearance from any side walls
of at least 110 mm as shown in Figure
1
.
For installing in a column, follow the dimensions given in Figure
2
allowing for a
clearance of 80 to 90 mm at the top and sides of the column. Tighten the four
screws (ref.
A)
inside the frame to secure (Fig.
1
).
For installing beneath a separate hob, allow for a rear and bottom
clearance as shown in Figure
1
(ref.
B
). See relevant instructions for fitting
and securing the hob.
