Instructions for the User
29
7.
Using the hob
Check that the fixing cover plates E, the
burners, the flame diffuser rings and the pan
stands are fitted correctly.
The projections A on the flame diffuser rings
must be fitted into the recesses B in the burner.
The holes C in the burner must mate with the
ignition plugs and thermocouples D on the hob.
Woks must be used with the special reduction
fitting (supplied on request). The reduction
fitting is placed over the grill on the burner top
as shown in the figure alongside.
7.1 Fitting the pan stands
The pan stands are supplied dismantled from the hob. To place each pan stand on its
burner correctly, follow the instructions provided below:
Each rack must be positioned on the corresponding burner in
order to guarantee proper operation.
Be very careful to match the different central diameters of the
racks to the flame-spreader crowns.
