Smeg PX1402AU Скачать руководство пользователя страница 6

Instructions

8

1.4 Disposal

This appliance must be 
disposed of separately from 
other waste (Directives 

2002/95/EC, 2002/96/EC, 
2003/108/EC). The appliance 
does not contain substances in 
quantities sufficient to be considered 
hazardous to health and the 
environment, in accordance with 
current European directives.
To dispose of the appliance:

•  Cut the power supply cable and 

remove it along with the plug.

•  Deliver the appliance to the 

appropriate recycling centre for 
electrical and electronic 
equipment waste, or return it to the 
retailer when purchasing an 
equivalent product, on a one for 
one basis.

Our appliances are packaged in 
non-polluting and recyclable 
materials.
•  Deliver the packing materials to 

the appropriate recycling centre.

1.5 Identification plate

The identification plate bears the 
technical data, serial number and 
brand name of the appliance. Do not 
remove the identification plate for 
any reason.

1.6 This user manual

This user manual is an integral part of 
the appliance and must therefore be 
kept in its entirety and within the 
user’s reach for the whole working 
life of the appliance. Read this user 
manual carefully before using the 
appliance.

Power voltage 

Danger of electrocution

•  Disconnect the mains power 

supply.

•  Unplug the appliance.

Plastic packaging

Danger of suffocation

•  Do not leave the packaging or 

any part of it unattended.

•  Do not let children play with the 

packaging plastic bags.

Содержание PX1402AU





























Отзывы: