User instructions
6 8
9 10
11
4
1
5 7
3 2
ANNULLING A PROGRAM
To annul the program, keep the
START/PAUSE
button
(2)
pressed until
the program is interrupted (light on and confirmation beep).
Press button
(2)
again and keep it
pressed until the
lights
4
and
5
(marked
"end") come on.
The water in the tank will be pumped out and the program will end at the
point where it was interrupted.
In case that the door is opened during the operation, to the next door
closing it is going to be necessary to start the program as shown in
paragraph “
S
TARTING THE PROGRAM
”. The program will resume from the
point in which it was interrupted.
In case that the tub temperature is higher than 50°C the program
will start about 30 seconds later.
Bio
end
Содержание PLTW620
Страница 1: ...INSTRUCTION MANUAL DISHWASHER...