Instructions for the installer
6
2.
INSTALLATION OF THE APPLIANCE
The following operation requires building and/or carpentry work so must
be carried out by a competent tradesman.
Installation can be carried out on various materials such as masonry,
metal, solid wood or plastic laminated wood as long as they are heat
resistant (T 90°C).
2.1
Attachment to support structure
Create an opening with the dimensions
shown in the figure in the top surface of
the counter, keeping a minimum
distance of 50 mm from the rear border.
1
This appliance is classified as “type Y” in
relation to fire hazards and can therefore
be mounted against walls higher than
the work surface on condition that a
certain distance “X” be kept between the
appliance and the wall as shown in the
figure so as to avoid damage from
overheating.
Make sure there is a minimum of 750 mm between the hot plate flames
and any shelf that may be installed directly above them.
To fix the appliance to the worktop,
insert the 4 fixing brackets (A) as
shown in the diagram until they fit
securely into place.
Then use 4 self-tapping screws to
fix the appliance to the worktop
through the slots B.
Overall dimensions: location of gas and electrical connection points (all
measures in mm).
PSA9R
A
44
B
147
C
68
D
128
