Instructions for the installer
83
When installing in tall units, comply with the dimensions shown in figures
1
and
2
, bearing in mind that the top/rear of the unit must have an opening 35-40 mm
deep.
Remove the screw covers on the frame and screw in the 2 screws
A
(fig. 5) to fix
the appliance to the unit. Replace the screw covers. For installing beneath a
countertop hob, allow for a rear and bottom clearance as shown in Figure
1
(ref.
F
).
See the relevant instructions for fitting and securing the appliance.
FIG.1
A
B
C
D
E
Measurements
(mm)
583 ÷ 585
554 ÷ 564
490 ÷ 500
560 min.
35 ÷ 40