User instructions
28
CANCELLING THE PROGRAM IN PROGRESS
-
Open the door
(watch out for water splashes)
-
Press the
START
button and hold it down until
P0
appears on
the top display.
-
Close the door
(00:01 appears on the front display)
-
After about 1 minute the program will be cancelled (
“End”
appears on the front display).
CHANGING THE PROGRAM
To change the program in progress, simply open the door (watch out for
water splashes) and select a new program. When the door is closed the
dishwasher will automatically run the new program.
TO SAVE ON ENERGY! … AND PROTECT THE ENVIRONMENT
If the manufacturer's instructions and recommendations are
followed, washing the same number of similarly soiled dishes in a
dishwasher consumes less water and energy than if they were
washed by hand.
Always use the dishwasher
with a full load
.
Load the dishwasher as indicated in the instructions manual. If the
dishwasher is loaded incorrectly, it may lead to poor results as well
as waste water, energy and detergent.
Do not wash dishes under running water before placing them in the
dishwasher. It would just waste water and energy.
Use the washing program that is
most appropriate
for each type of
load.
If available, connect the dishwasher to a hot water supply up to
60°C.If the manufacturer's instructions and recommendations are
followed, washing the same number of similarly soiled dishes in a
dishwasher consumes less water and energy than if they were
washed by hand.
