User instructions
13
N.B.:
When the salt and rinse aid containers are empty, the relative lights will
remain on even if the “Flexi Tabs” option is selected.
IMPORTANT:
when no longer required, the option must be deactivated by pressing
the relative button (the light goes out).
If the water hardness has been set on a value above H3, and the “Flexi
Tabs” option is activated, the relative light flashes, warning of a setting
error. Multi-function products are not suitable for use with very "hard"
water; this does not prevent the use of the option, but the washing
results might not be of the best.
PROGRAM DELAY
The PROGRAM DELAY button can be pressed to delay the start of the
washing program by 3,6 or 9 hours, indicated by the PROGRAM
DELAY/PROGRAM PHASES (5) lights. This function allows you to set
the dishwasher to work at your preferred time of day.
After selecting the delay, start the program (see relative section).
The appliance will prewash the dishes, after which the “program delay”
set previously will come into effect (option light and light of selected
program on).N.B.: It is not possible to select the PROGRAM DELAY
option once the cycle has begun.
Remaining program delay time:
with this option active, the user can view the time left before the washing
cycle starts.
•
press the START/PAUSE button (3); the light of the first phase (5)
of the selected program (4) comes on, while the program light
flashes (confirmation beep);
•
press the PROGRAM DELAY button. One of the PROGRAM
DELAY lights (5) will flash to indicate whether less than 3, 6, 9 or
12 hours are left before the dishwasher starts.
Содержание LVS329SX
Страница 2: ......
