User instructions
19
ENERSAVE
This option further
reduces
energy
consumption by opening the door at
the end of the cycle for more effective drying. At the end of the program
an automatic device releases the door, which slowly opens by a few
centimetres (brief acoustic signal). This allows optimal drying, even with
low rinsing temperatures, for significant
energy savings
.
Between the final rinsing and the end of the program (opening of the door),
the dishwasher remains inactive to allow proper drying.
Opening the door interrupts the drying cycle and the program
ends.Enersave
is automatically activated in all programs that
include
a
final drying phase (see program table). It is possible to disable it before
starting the program.
If this function is active,
never prevent the door from opening
by any
means, clear the space necessary to allow the opening of the door.
Do
not force the closure of the door
before the end of cycle signal, because
this would damage the mechanism.
PROGRAM DELAY
The
PROGRAM DELAY
button can be pressed to delay the start of the
washing program by
3, 6, 9 or 12 hours
. This function allows you to set
the dishwasher to work at your preferred time of day.
After selecting the delay, start the program (see relative section).
The appliance will prewash the dishes, after which the “program delay” set
previously will come into effect (light indicating the time left before the start
of the program and light indicating the program set
flash
).
N.B.:
It is not possible to select the
PROGRAM DELAY
option once the
cycle has begun.
