Smeg LSTA147SSA Скачать руководство пользователя страница 21

Страница: 21 / 38

4.16 CHILD LOCK

1. When this function is activated, the modification of options, temperatures, spin speed and the washing/dry-

ing cycle is not possible while the cycle is in progress.

2. To activate the Child Lock, press the Confirm option button (1) and hold it down. Also press the Option

selection button (2) within 3 seconds.

3. The Child Lock symbol lights up to show that the function has been activated.
4. Repeat the same procedure to deactivate the function

4.17 OPENING THE APPLIANCE IN AN EMERGENCY

In the event of a power failure, the door is opened using the
mechanical release device activated by means of the lever in
the bottom of the appliance:



Turn the knob to Off and disconnect the power
supply plug from the socket.



Drain off the water (see point 6.4)



Pull the lever down and open the door.

Warning, scolding hazard

: before opening the door, check

that the appliance does not contain boiling hot water and deter-
gent which may pour out and cause injury when the door is
opened.

Warning

: do not open the door using the emergency release

lever while the drum is turning.

Child Lock Symbol

Содержание LSTA147SSA







































Результаты поиска

Содержание LSTA147SSA

Отзывы:

Похожие инструкции для LSTA147SSA

Бренды по названию

Популярные бренды

Smeg LSTA147SSA, Инструкция по эксплуатации

Результаты поиска

Содержание LSTA147SSA

Отзывы:

Похожие инструкции для LSTA147SSA

Бренды по названию

Популярные бренды