Smeg LST107-2, Инструкция по эксплуатации

Страница: 14 / 29

EN
13
4.12 TIME TO END
1.
The Time to End key can be pressed repeatedly to select the time after which the washing programme
will end. The time to end of cycle function calculates the initial duration of the washing cycle, the settings
made (temperature, spin speed and options) which may shorten or lengthen the cycle's initial duration,
and the delay time the user wishes to add before the cycle starts.
2. After the time to end has been set, the symbol on the display remains on.
3. To annul the Time to End function, keep pressing the key repeatedly until the display shows 0.
4. The Start Pause symbol flashes on and off until the cycle starts. After the cycle starts, the symbol re-
mains constantly lit.
4.13 STARTING THE WASHING PROGRAMME
1. To start the washing programme after making your personal settings, press the Start Pause button.
2. Once the cycle has started, the display shows the time remaining before the end of the cycle and the
Start Pause symbol on the display is constantly on.
3. During performance of the washing programme, the symbols which identify the various phases light up:
4.14 INTERRUPTING OR CHANGING THE WASHING PROGRAMME
The washing programme in progress can be interrupted at any moment:
1. Press the “Start/Pause” button for about 3 seconds: the display shows the word PAUS (for 1 second) al-
ternating with the time remaining until the end of the cycle (for 1 second). The Start/Pause light flashes
on and off.
Programmes can also be interrupted by turning the programme/temperature setting knob while the cycle
is in progress.
2. To change the washing programme, simply turn the programme knob to select the new programme; the-
re is no need to set the appliance in pause status. The new cycle will be carried out completely, begin-
ning from the start. If the tank had already been filled with water during the previous cycle, the water in-
take phase will be omitted from the new programme.
3. To restart the cycle, press the Start-Pause button again.
Delay Time to end
Delay Time to end
Start Pause
Start pause symbol
Cycle phase symbols: Prewash, wash, rinse and final spin.