User instructions
20
5 Cleaning and maintenance
Before carrying out any work, always unplug the appliance from
the electrical supply or switch off the omnipolar circuit breaker.
CLEANING THE WATER INTAKE FILTER
Close the water supply tap, unscrew the end of the water intake hose,
remove the filter
A
and clean it under running water. Put the filter
A
back
into its seat and carefully screw the water intake hose back on.
CLEANING THE SPRAY ARMS
Remove the spray arms and wash them with a jet of water. Put them back in their
seats,
making sure that there is nothing to prevent them from rotating.
To remove the
upper
spray arm, unscrew locking ring
R
.
To remove the
lower
spray arm, simply lift it up, pulling by the
central part.To remove the
orbital
spray arm assembly, take
hold of the longer arm and pull the orbital unit upward.
To remove and clean the
planetarium
sprayer follow the instructions provided.
CLEANING THE FILTER UNIT
Remove the planetarium spray arm (only for the models on which it is fitted)
Grip the tabs, turn them anticlockwise and lift upwards.
Push the central filter
D
from underneath to remove it from the micro-filter.
Separate the two parts that make up the plastic filter by pressing the body of the
filter in the zone indicated by the arrows.
ORBITAL
PLANETARIUM
