Smeg LSP6445XD, Инструкция по эксплуатации

Страница: 19 / 40

User instructions
17
OPTIONS
The options are controlled by the OPTION
SELECTION button (3) .
Press the button to access the procedure,
confirmed by flashing of one of the
OPTIONS
lights (E).
N.B.: The PROGRAM DELAY light only comes on when the specific
PROGRAM DELAY button (5) is pressed.
Press the SELECT OPTIONS button (5) again to display the next option. To
confirm an option, press the CONFIRM OPTION button (6) (the light stops
flashing and remains on). This operation can be carried out for one or all of
the options available. To deactivate an option which has already been
confirmed, press the
OPTION SELECTION button (3) until the OPTION
LIGHT required flashes, and press the CONFIRM OPTION button (6) . The
light stops flashing and goes out.
All options except "Flexi Tabs" are disabled at the end of the wash cycle.
Flexi Tabs
Ideal for multi-function detergents, this option allows washing to be
optimised, with full benefits from the combined-action tablets. When this
option is activated, any salt and rinse aid in the relative containers will
not be used.
If the option is not provided , we recommend the use of conventional
products (separate detergent, salt and rinse aid), because with
conventional washing cycles, combined products might create problems
such as a white deposit, poor drying results and residues left on dishes.
N.B.:
When the salt and rinse aid containers are empty, the relative lights will
remain on even if the
“Flexi Tabs” option is selected.
IMPORTANT:
when no longer required, the option must be deactivated by pressing
the relative button (the light goes out).
If the water hardness has been set on a value above H3 , and the “Flexi
Tbas ” option is activated, the relative light flashes, warning of a setting
error. Multi-function products are not suitable for use with very "hard"
water; this
does not prevent the use of the option, but the washing
results might not be of the best.