User instructions
13
END OF PROGRAM
At the end of the program the beeper sounds briefly and the program
lights
4
and
5
(marked "end") flash.
INTERRUPTION A PROGRAM
To interrupt a program in progress:
•
press
the
START/PAUSE
button
(2)
; the light of the program in
progress remains on (confirmation beep);
•
you may now restart the program by pressing button
(2)
again until it
restarts, or change or annul the program (see "
C
HANGING A
PROGRAM
", or "
A
NNULLING A PROGRAM
").
CHANGING
A
PROGRAM
To change the running program it is necessary:
•
to interrupt the running program (see “
I
NTERRUPTION A PROGRAM
”);
•
select the new program;
•
start the program (see “
S
TARTING THE PROGRAM
”).
ANNULLING A PROGRAM
To annul the program, keep the
START/PAUSE
button
(2)
pressed until
the program is interrupted (light on and confirmation beep).
Press button
(2)
again and keep it
pressed until the
lights
4
and
5
(marked
"end") come on.
The water in the tank will be pumped out and the program will end at the
point where it was interrupted.
