Smeg LBI147 страница 8 Скачать руководство пользователя

Страница: 8 / 83

2. INSTALLATION INSTRUCTIONS

Important!

The appliance must be installed by a qualified engineer in compliance
with the relevant regulations.
The washing machine is heavy. Take care when lifting it.

2.1 UNPACKING

The unit on flexible mounts is fixed in place for transport using the screws (

on the rear of the washing machine with the relative plastic spacers

(B)

. Once

the screws have been removed, the power supply lead can be used.

1. Undo

all

the screws with a 10 mm spanner.

2. Remove

all

the screws (

from the rear

3. Remove

all

the plastic spacers

(B)

Fit

all

the plastic plugs

(C)

provided, to pre-

vent water splashes from getting into the appli-
ance, and contact with live parts.

Warning!



Do not

turn the appliance upside-down or place it on its sides.



All the transport retainer fittings should be kept in a safe place; they must be

fitted again if the appliance has to be moved around in the future.

A+B

Содержание LBI147




















































































Результаты поиска

Содержание LBI147

Отзывы:

Похожие инструкции для LBI147

Бренды по названию

Популярные бренды

Smeg LBI147, Инструкция по эксплуатации

Результаты поиска

Содержание LBI147

Отзывы:

Похожие инструкции для LBI147

Бренды по названию

Популярные бренды