Smeg LB107-1, Инструкция по эксплуатации, Страница: 13 / 32

242221
Cold wash
For washing less soiled or colour-sensitive clothes.
Upon switching this function ON, the heating function of this
cycle is switched OFF, therefore the whole program is adequately
shortened.
Pre-wash
Used for washing heavily stained laundry, especially with
super
fi cial stains. In default setting the pre-wash function is off. It
is activated by pressing the SELECTION knob (C) on programs
for cotton, synthetics, delicate and mixed laundry.
Soaking
This program is intended for removal of stubborn stains. In
default setting the soaking function is off. It is engaged by
pressing the SELECTION knob (C). Soaking time may be set
from 1 h to maximum 6 hours, in 30 minute steps. At the end of
the preset time the machine automatically starts the selected
washing program.
Delayed start
The function enables delay of starting the washing procedure for
up to 20 hours, in 30 minute intervals for the
fi rst two hour delay,
and in hourly intervals for the rest.
Delay is set by pressing or keeping pressed the SELECTION
knob (C) for the required time of delay.
In case you wish to change or suspend the delayed start after
starting the machine with the START knob (F), you may do so by
pressing the MENU knob (B). The delayed start appears; using
the SELECTION button (C) reset the delay period.
Setting the end of program
(certain models only)
Caution : prior this setting check whether the current time of day
is set correctly (see section Special functions). Set the time you
want the program to end the washing procedure.
The machine will automatically calculate the starting time,
depending on the selected program. End of washing may be
delayed for maximum 20 hours, in 30 minute intervals for the
fi rst
two hour delay, and in hourly intervals for the rest.
Function is set by pressing or keeping pressed the SELECTION
knob (C) until the required time to end the washing appears on
display.
13