User instructions
CANCELLING THE CURRENT PROGRAM
To annul the current program, press the
START/PAUSE
button
(2)
for a few seconds, until the
PROGRAM STARTED
light
(5)
stops flashing. Now press the
START/PAUSE
button
(2)
again until
"
P0
" appears on the display (about
10 seconds
).
CHANGING THE PROGRAM
To modify the program keep the
START/PAUSE
button
(2)
pressed for a few seconds, until the
PROGRAM STARTED
indicator light
(5)
stops flashing, then select the new program following the
instructions provided above; press the
START/PAUSE
button
(2)
again and keep it pressed for a
few seconds, until the indicator light
(5)
starts to flash again.
DELAYING THE PROGRAM (available in all programs except the soak program)
The
PROGRAM DELAY
button
(3)
can be pressed to delay the start of the washing program by up
to
12 hours
. This means that the dishwasher can be operated at the time of day of your choice.
Press the
PROGRAM DELAY
button
(3)
again; the
3-FIGURE DISPLAY (6)
will show the number
of hours of delay with which the appliance will start.
The
3-FIGURE DISPLAY (6)
shows the set washing program duration in hours and minutes.
After setting the delay, start the program: press the
START/PAUSE
button
(2)
for a few seconds,
until the
PROGRAM STARTED
light
(5)
starts flashing.
The appliance will prewash the dishes, after which the "program delay" set previously will come
into effect.
To cancel the program delay once the wash has started, proceed as follows:
•
press
the
START/PAUSE
button
(2)
for a few seconds, until the
PROGRAM STARTED
light
(5)
stops flashing;
•
press
the
PROGRAM DELAY
button
(3)
several times until the program delay returns to zero;
•
press
the
START/PAUSE
button
(2)
to start the program.
N.B.:
It is not possible to select the “delay program” when the program have already began.
TO SAVE ON ENERGY! … AND PROTECT THE ENVIRONMENT
•
Always try to run the dishwasher
fully loaded
.
•
Do not wash the dishes in running water.
•
Use the washing program that is
most appropriate
for each type of load.
•
Do not carry out any preliminary rinsing.
•
If available, connect the dishwasher to a hot water supply up to 60°C.
•
When possible,
disable the drying cycle
and leave the door open at the end of the washing
cycle: the residual air and heat will dry the dishes perfectly.
TO CUT DOWN ON DETERGENT CONSUMPTION! … AND PROTECT THE ENVIRONMENT
The phosphates contained in dishwasher detergents are harmful to the environment. To avoid
using excessive amounts of detergent and to save on electricity, observe the following:
•
separate
the more delicate items from dishes that are more resistant to aggressive detergents
and high temperatures;
•
do not pour
the detergent directly on the dishes.
