Smeg KLF05WHUS, Инструкция по эксплуатации

Страница: 12 / 15

14 14
Description / Use
3 Use
3.1 Before first use
1) Remove all stickers and labels from
the kettle and clean the outside with a
damp cloth.
2)
Remove the kettle from its base (
Fig. B
),
use the knob to open the lid ( Fig. C ) and
fill it to the maximum level ( 5 - Fig. A ).
3)
Close the lid (
Fig. D
), place the kettle
on its base (
Fig. E
) and push the lever
down to turn it on ( Fig. F ).
4) Wait for the water to boil, then empty
the kettle, disposing of the boiling water
safely. Repeat this at least three times.
3.2 Operation
If necessary, wind the cord under the base
( 7 and 8 - Fig. A ).
Always use the handle (
4 - Fig. A
) to lift the
kettle and pour out the water.
1) Remove the kettle from the base ( Fig. B ),
open the lid (
Fig. C
) using the knob and
fill with water, using the level indicator
( 5 - Fig. A ) for reference. Avoid filling
it with too much or too little water as
indicated by the maximum or minimum
level indicators.
2) Close the lid ( Fig. D ) and place the
kettle back on its base ( Fig. E ).
3)
Then insert the plug into the power
socket.
4) Push the lever downwards to switch
the kettle on. The LED lights up and
becomes white (
Fig. F
).
5) When the water boils, the lever
automatically moves into the OFF
position and the LED switches off. Pour
out the water.
2 Product description
(Fig. A)
1) Anti-drip spout
2)
Manual opening lid
3) Knob
4) Handle
5) Internal minimum and maximum water
level indicator
6) ON/OFF lever with indicator light
7) Anti-slip 360° swivel base.
8) Cord wrap (under base)
To avoid damaging the
appliance, the kettle is equipped
with a safety device that
automatically turns the lever to
the OFF position if the kettle is
accidentally switched on without
water.
If this occurs, let the kettle cool
down before refilling or starting
the boiling circle again.