Smeg KLF03, Инструкция по эксплуатации

Страница: 8 / 11

44
Description / Use
3.2 Operation
If necessary, wrap the cable under the base
(
7
and
8 - Fig. A
).
Always use the handle ( 4 - Fig. A ) to lift the
kettle and pour out the water.
1)
To begin, remove the kettle from the
base ( Fig. D ), press the button to open
the lid (
Fig. E
) and fill with water, using
the level indicator ( 5 - Fig. A ) as a
reference. Avoid filling it with too much
or too little water as indicated by the
maximum or minimum level indicators.
2) Close the lid and place the kettle back
on its base (
Fig. F
).
3) Then place the plug into the power
socket.
4) Push the lever downwards to turn
the kettle on. The LED lights up and
becomes white ( Fig. G ).
5)
When the water boils, the lever
automatically moves into the OFF
position and the LED switches off. Pour
out the water.
2 Product description
(Fig. A)
1)
Anti-drip spout
2) Scale filter
3)
Lid with push-push opening
4) Handle
5)
Water level indicator
6) ON/OFF lever with indicator light
7)
Cordless base with 360° operation
8) Cable compartment (under base)
To avoid damaging the
appliance, the kettle is equipped
with a safety device that
automatically turns the lever to
the OFF position if the kettle is
accidentally switched on without
water.
If this occurs, let the kettle cool
down before starting the boiling
cycle again.
3 Use
3.1 Before first use
1) Remove any sticker from the kettle and
clean the outside with a damp cloth.
2) Remove the scale filter behind the spout
(
Fig. B
) and wash it under running
water.
3)
Replace the filter in the correct position
( Fig. C ).
4)
Remove the kettle from its base (
Fig. D
),
press the button to open the lid ( Fig. E )
and fill it to the maximum level (
5 - Fig.
A ).
5)
Close the lid, place the kettle on its
base ( Fig. F ) and push the lever down
to turn it on (
Fig. G
).
6) Wait for the water to boil, then empty
the kettle, disposing of the boiling water
safely. Repeat this operation at least
three times.