EN
1
12
AIR OUTLET IN THE RECYCLING MODE
• Open the metal grid and make sure that the
conversion knob is in the recycling position.
• Place the charcoal filter. The charcoal filter is not
supplied together with the hood. (Hoods with two
motors needs to be equipped with two charcoal
filters).
INSTRUCTIONS FOR OPENING AND REMOVING THE
METAL GRILLE PANEL
• To open the grille, pull the facia panel out into the
operating position.
• Press inwardly on the two slide catch fastners, lo-
cated at each side of the grille near the facia panel,
while pulling the grille panel onwards. The grille
may then pivot down.
• To remove the grille, release the right hand hinge pin
from the slot along the casing and the grille can be
removed.
ELECTRICAL CONNECTION
• Connect the hood to the mains through a two-pole switch having a contact gap of at least 3
mm..
