EN
2
29
Inserting the Hood Canopy into the support surface from above
• Insert the Brackets
7.2
, as indi-
cated in the figure, into the slots
provided and fix them with the
screws
12a
provided.
• The Hood is built
ready for front in-
stallation of the
Motor Unit.
• If the kitchen unit is arranged differently and the Motor Unit
has to be fitted on the back, the Plug already fitted on the back
of the Hood Canopy must be removed and replaced at the front,
and the Cable with cable raceway for connection of the Motor
must also be repositioned using the slot provided on each side
(
A
).
• Insert the Hood Canopy into the cooker top,
drilled as described above.
• Centre the Hood Canopy with respect to the
Cooking Hob slot.
• Fix the Hood Canopy with the 2 screws
12c
provided.
Warning:
If the cooker top is made from a material that does not allow the screws
12c
to be inserted, use
a small amount of silicone to glue the Brackets
7.2
to the top and allow it to dry completely
before proceeding with installation.
7.2
12a
7.2
12a