WARNING: technical specifications and product sizes can be varied by the manufacturer without
notice. Cutouts for appliances should only be by physical product measurements. The above
information is indicative only.
NB: drawings are not to scale — they are to assist only
electricity supply
240 volt, 50 Hz
electrical
connection
0.85 metre connected power cord for
plugging to standard 10 amp GPO
wattage
250 watt, 2 x 20 watt halogen globes, 290
watts total
current
1.21 amps
packaged
dimensions
1040mm x 670mm x 640mm = 0.45m³
gross weight
36.35 kg
net weight
29.10 kg
supplied
• instructions for installation, operation,
maintenance
• screws and wall bracket
• 150/125mm diameter ducting adaptor
• recirculation diverter kit
optional
activated charcoal filter cartridge to
slot below the centrifugal motor in the
recirculation installation, part number
08999802
K9998
90cm rangehood, wall mount, stainless steel, peripheral filter
ID200209
code K9998
SPEED
1
2
3
4
net air capacity m
3
/hr
300 430 600 700
pressure mm H20
36
42
44
45
wattage
120 160 200 250
noise dBA
40
48
54
56
direct ducting to atmosphere
recirculation to kitchen
chimney plan detail
PLEASE NOTE the difference in maximum heights between the ‘
direct duct to
atmosphere
’ installation and the ‘
recirculation
’ installation. The recirculation
installation’s maximum height is 1325mm due to the active recirculation vents
necessarily being exposed on each side of the chimney. The ‘direct duct to
atmosphere’ installation shows the now redundant recirculation vents being
concealed by the lower chimney by reversing — that is, turning the upper chimney
piece 180 degrees on the vertical.
If a higher chimney height is required for the ‘direct duct to atmosphere’
installation, that is, up to 1325mm, simply follow the ‘recirculation’ installation and
have the recirculation vents exposed, though redundant.
253
277