Instructions for the user
38
13.EXTRAORDINARY MAINTENANCE
The oven may require extraordinary maintenance or replacement of parts subject to wear such as
gaskets, bulbs, etc. The following instructions describe how to carry out these minor maintenance
operations.
Before performing any operations requiring access to powered parts, switch off the power
supply to the appliance.
13.1 Changing the light bulb
Remove the protective cover
A
by unscrewing it clockwise; replace the bulb
B
with another of the same
type (25 W). Re-fit bulb protector
A
.
Use oven bulbs only (T 300°C).
13.2 Removing the door
Open the door completely, raise the levers B
and take hold of the two sides with both hands
near the hinges A. Lift the door up forming an
angle of approximately 45° and remove it. To
reassemble, fit the hinges A into their grooves,
then lower the door into place and release the
levers B.
13.3 Removing the door seal
To permit thorough cleaning of the oven, the seal may be removed.
Before removing the seal, take off the door as described above. Once the
door has been taken off, lift the tabs at the corners as shown in the figure.
