Instructions for Use
28
Placing and Installation
Choosing the Right Place
Place the appliance in a dry and regularly
ventilated room. Allowed ambient temperature
depends on the model (class) of the appliance
and is stated on the rating plate of the
appliance. Never place the appliance near heat
emitting devices (e.g. cooker, radiator, water
heater or similar devices) and do not expose it
to direct sunlight. The appliance should be
positioned at least 3 cm away from the electric
or gas cooker and at least 30 cm away from the
oil or coal stove. If this is not possible, use an
appropriate insulation. Behind the appliance
there should be free space at least 200 cm²
wide and above the appliance the high kitchen
units should be at least 5 cm away from the
appliance in order to assure adequate
ventilation of the condenser unit.
Class
Ambient temparature
SN (sub-normal)
from + 10°C to + 32°C
N (normal)
from + 16°C to + 32°C
ST (sub-tropical)
from + 16°C to + 38°C
T (tropical)
from + 16°C to + 43°C
Connection to Power Supply
Connect the appliance with the cable and plug
to the power supply socket outlet with a ground
terminal (safety socket).
Required nominal voltage and frequency are
indicated on the rating plate.
The connection to the mains supply and
earthing have to be made according to current
standards and regulations. The appliance
resists temporary voltage tolerance up to -6 to
+6 %.
Description of the Appliance
Shelf (1)
(the number of shelves depend on model)
Shelf can be optionally placed on the guides
inside the appliance. It is protected against
pulling out. If you want to remove it, slightly lift
up the back part and pull it out. Glass shelves
(some models only have them) are protected
with plastic spacers. Before pulling the shelf
