Smeg FD43PB, Инструкция пользователя

Страница: 14 / 16

UK - 13 -
If the edges of fridge cabinet that the door joint contact are warm;
• Especially in summer (hot weather), the surfaces that the joint contact may get warmer
during the operation of the compressor, this is normal.
If humidity builds up inside the fridge;
• Are all food packed properly? Are the containers dried before placing them in the
fridge?
• Are the fridge doors opened frequently? Humidity of the room gets in the fridge when
the doors are opened. Humidity build up will be faster when you open the doors
more frequently, especially if the humidity of the room is high.
• Building up of water drops on the rear wall after automatic defrosting is normal. (in
Static Models)
If the doors are not opened and closed properly;
• Do the food packages prevent closing of the door?
• Are the door compartments, shelves and drawers placed properly?
• Are door joints broken or torn?
• Is your fridge on a level surface?
Recommendations
• In order to increase space and improve the appearance,the « cooling section » of
this appliance is positioned inside the back wall of the refrigerator compartment.
When the appliance is running, this wall is covered with frost or water drops,according
to weather the compressor is running or not. Do not worry. This is quite normal. The
appliance should be defrosted only if an excessively thick layer forms on the wall.
• If the applianc e is not used for long time (for examp le du ring the summer
holidays)Defrost and clean the refrigerator leaving the door open to prevent the
formation of midew and smell.
• To stop the appliance completely, unplug from main socket (for cleaning and when
the doors are left open)