142306
Instructions for Use
19
Disposing of the Worn Out Appliance
•
When your appliance finally wears out, dispose it of. If the
appliance has a lock, break it, in order to prevent eventual
accidents (danger of children get locked inside the
appliance).
•
The refrigerating system of the appliance is filled with
refrigerant and insulating substances which should be
separately treated and processed. Call your nearest
authorised service agent or specialised servicing centre. If
you don't find one, contact your local authorities or your
distributor. Be careful not to damage the tubes on the rear
wall of the appliance (danger of pollution).
Placing and Installation
Choosing the Right Place
Place the appliance in a dry and regularly ventilated room.
Allowed ambient temperature depends on the model (class) of
the appliance and is stated on the rating plate of the appliance.
Never place the appliance near heat emitting devices (e.g.
cooker, radiator, water heater or similar devices) and do not
expose it to direct sunlight. The appliance should be positioned
at least 3 cm away from the electric or gas cooker and at least
30 cm away from the oil or coal stove. If this is not possible,
use an appropriate insulation. Behind the appliance there
should be free space at least 200 cm² wide and above the
appliance the high kitchen units should be at least 5 cm away
from the appliance in order to assure adequate ventilation of
the condenser unit.
Class
Ambient temperature
SN (sub-normal)
from + 10°C to + 32°C
N (normal)
from + 16°C to + 32°C
,ST (sub-tropical)
from + 16°C to + 38°C
T (tropical)
from + 16°C to + 43°C
Placing the Self-standing Appliance
•
Place the appliance firmly on a solid base. Some appliances
have adjustable feed on the front side; use them to level the
appliance.
•
Two spacers attached to the appliance must be fitted onto
the upper edge of the condenser, thus preventing the
appliance from being installed too close to the wall. Spacers
are manufactured for all-purpose function depending on the
distance of the condenser from the wall. Therefore turn
spacers correspondingly and fix them to the appliance.
•
The appliance may stand freely or it can be placed next to a
kitchen furniture element or a wall. Mind the space required
to open the door and pull out the drawers and shelves (see
installation diagram).
35 mm
90
o
Connection to Power Supply
Connect the appliance with the cable and plug to the power
supply socket outlet with a ground terminal (safety socket).
Required nominal voltage and frequency are indicated on the
rating plate. The connection to the mains supply and earthing
have to be made according to current standards and
regulations. The appliance resists temporary voltage tolerance
up to -6 to +6 %.
Description of the Appliance
Shelf (1)
(the number of shelves depends on model)
Shelf can be optionally placed on the guides inside the
appliance. It is protected against pulling out. If you want to
remove it, slightly lift up the back part and pull it out.
Quickly perishable food should be stored on the back i.e. the
coldest part of the shelves.
Bottle rack
(only some models have it)
Bottle rack (number depends on model) is intended for storing
the bottles. There are two installation positions available
(horisontal or lifted in the font) thus enabling the positioning of
bottles on the stopper as well.
It is protected against the extraction. If you want to extract it,
lift its rear part and pull towards yourself.
