User instructions
14
TO CUT DOWN ON DETERGENT CONSUMPTION! … AND PROTECT
THE ENVIRONMENT
The phosphates contained in dishwasher detergents are harmful to the
environment. To avoid using excessive amounts of detergent and to save
on electricity, observe the following:
separate
the more delicate items from dishes that are more resistant
to aggressive detergents and high temperatures;
do not pour
the detergent directly on the dishes.
If the door has to be opened while washing is in progress, the program will
be interrupted. The relative light will keep flashing and a beeper will signal
that the cycle has not been completed. You must wait about
1 minute
before closing the door to restart the program. When the door is closed
the program will continue from where it was interrupted. This operation
should
only be carried out if strictly necessary
, because it might cause
problems in execution of the program.
END OF CYCLE
At the end of the washing cycle the
dishwasher gives a short acustic signal
and the program
indicators
nr
4
and
5
start blinking (the word "end" is
displayed on the window).
To switch off the dishwasher, open the door and press the
ON/OFF
button
(1)
.
ENERGY MANAGEMENT
After
5 minutes of waiting
(washing cycle completed, stopped or set but
not started) the dishwasher switches to a
standby
state to reduce energy
consumption
.
In this state, the dishwasher indicator panel (lights or display depending
on model) functions more slowly (
switch-on once
every
5 seconds
).
REMOVING THE DISHES
At the end of the washing program, wait at least
20 minutes
before
removing the dishes, to allow them to cool down. To prevent any water
droplets on the upper basket from falling on the dishes in the lower basket,
it is
advisable
to unload the lower basket first, and then the upper basket.
