User instructions
42
3.3 Washing programs
The dishwasher is equipped with a control panel and an
INFORMATION
DISPLAY
, described in chapter "3. Description of the controls", from
which it is possible to carry out all the power switch-on, switch-off and
programming operations.
Before starting a washing program make sure that:
•
The water supply tap is
open.
•
The
correct amount of detergent
has been added to the
dispenser
.
•
The baskets have been
correctly loaded.
•
The spray arms are able to
rotate freely
and without
obstruction.
•
The dishwasher door is
securely closed
.
HALF LOAD WASH SETTING
This function is especially
suitable for loads up to
6
place settings
and allows
saving of water and
electricity.
Models with NO DRYING CYCLE function
It is controlled by the
HALF LOAD
button
(6)
(see section "3. Description
of the controls") and allows washing in the upper basket only.
Models with ECO DRYING CYCLE function
You may carry out the "half load" wash in the top or bottom basket as you
prefer, as follows:
1) program selection;
2) press the
HALF LOAD
button
(6)
(see section "3. Description of the
controls") once to select the upper basket ;
3) press the
HALF LOAD
button
(6)
twice to select the lower basket ,
press a third time to return to condition "
1
";
4) after 5 seconds the display returns to this configuration (to see which
basket has been selected, simply press the "
½ load
" button key again).
