Smeg DRY72C-1, Инструкция по эксплуатации

Страница: 9 / 16

236156
- Select drying time
• By turning the drying time selector, set the preferred drying
period, according to the type and quantity of laundry and
washing machine spin rpm (see drying program chart).
Selector jog may be turned in both directions. Available time
span is from 15 min. to 140 minutes, LED (E) is
fl ashing. Final
10 minutes of the drying cycle is the cooling period (the heater
is off).
• It is also possible to select the ventilation program, lasting 20
minutes ( ). During this program the heater is off.
- Selection of additional functions
Additional functions are selected prior pressing the START
button (D).
Decreasing the temperature
By pressing the button (B) the drying temperature is decreased,
the LED over button is on; this way, however, the drying cycle
is longer. It is therefore recommended for only drying delicate
laundry.
After the drying is completed, the function returns to
initial higher temperature.
XL program button
Press the (C) button to activate the XL program (the LED over
the button lights up)
When activated, this function prevents larger pieces of laundry to
wrap or twist together during drying.
• Press the START /PAUSE button (D) - LED E is on, appliance
starts to operate (after a 2 second pause).
• 10 minutes prior the end of drying program the machine starts
the cooling cycle (heater is off), which prevents excessive
creasing.
• At the end of the cooling program the appliance switches
on the anti-crease program, which lasts for 1 hour (periodic
tumbling of the drum); LED (E) is
fl ashing.
• If you open the dryer door the anti-crease program is
suspended.
- End of drying
At the end of drying LED (E) fl ashes, which means that
the drying program is completed. LED (F) is on, which
for the evacuation type of dryer requires cleaning of
fi lter, and for the condensation type cleaning the fi lter
and draining the container.
Operating the dryer Operating the dryer
Drying procedure Drying procedure
9