background image

42  -  USE

91477A185/C

order to light the relative burners. Turn the knobs 
to the zone between the maximum 

 and 

minimum 

 setting to adjust the flame. Return 

the knobs to the 

 position to turn off the 

burners.

Advantages of induction cooking

• Energy saving thanks to the direct 

transmission of energy to the pan (suitable 
magnetisable cookware is required) 
compared to traditional electric cooking.

• Improved safety as the energy is only 

transmitted to the pan placed on the hob.

• High level of energy transmitted from the 

induction cooking zone to the base of the 
pan.

• Rapid heating speed.
• Reduced danger of burns as the cooking 

surface is only heated under the base of the 
pan; foods which overflow do not stick.

Power control

The hob is fitted with a power control module 
that optimises/limits consumption. If the overall 

set power level exceeds the maximum limit 
permitted, the electronic circuit board will 
automatically manage the power supplied by 
the hot plates. The module tries to maintain the 
maximum deliverable power levels. Levels set by 
the automatic control will appear on the display.

 

Accessories

• Not all accessories are available on some 

models.

• The accessories intended to come into 

contact with food are made of materials that 
comply with the provisions of current 
legislation.

• Original supplied and optional accessories 

can be requested to Authorised Assistance 
Centres. Use only original accessories 
supplied by the manufacturer.

Wok support

Useful when using a wok.

USE

Precautions

A gas leak can cause an explosion.

If you smell gas or there are faults in the gas 
system:
• Immediately turn off the gas supply or close 

the valve on the gas cylinder.

• Extinguish all naked flames and cigarettes.
• Do not turn on power switches or 

appliances and do not remove plugs from 
power sockets. Do not use phones or 

mobile phones inside the building.

• Open the window in order to ventilate the 

room.

• Call customer assistance services or your 

gas supplier.

Malfunctions

Any of the following indicate a malfunction and 
you should contact a service centre.
• The burners do not ignite properly.
• It is difficult to keep the burners lit.
• The burners go out when the appliance is in 

use.

• It is difficult to turn the gas cocks.

The appliance is equipped with an 
induction generator for each cooking 
zone. Each generator located under the 
glass ceramic cooking surface creates 
an electromagnetic field which induces 
a thermal current in the base of the pan. 
This means the heat is no longer 
transmitted from the hob to the pan but 
created directly inside the pan by the 
inductive current.

Priority is given to the last zone set.

The power control module does not 
affect the total power consumption of 
the appliance.

See General safety instructions.

Содержание Dolce Stil Novo PM6954R





























Отзывы: