Smeg Dolce & Gabbana KTU36DGC, Инструкция по установке, использованию и уходу, Страница: 13 / 18

14
Installation
5 Installation
5.1 Positioning
The minimum distance between the range
and the lower part of the hood (measure A)
must be:
The following instructions will assist
installation:
1. The hood should be centered with
respect to the range.
2. The hood is supplied with two supports/
hooks (A) that need to be fixed to the
wall by means of wall anchors. The L1
holes for these supports are on the back
of the hood.
3. Remove the anti-grease filters, put the
hood on the wall and mark the position
of the holes for the supports/hooks.
4. Drill the two previously marked holes
after removing the hood from the wall.
5. Fix the two supports/hooks to the wall.
6. Mark the L2 holes on the wall to fix the
hood safely.
7. Drill and put the anchors in the holes.
8. Hang the hood on to the supports/hooks
and level by means of the adjusting
screw.
9. Fix the hood safe by tightening both wall
anchors.
WARNING
• Use two or more people to move and
install this appliance.
for gas cooktops/
ranges
29
1
/
2
" (750 mm)
for electric cooktops/
ranges
25
1
/
2
" (650 mm)