Smeg DI614, Инструкция по эксплуатации

Страница: 18 / 45

18
7
. SPECIAL PROGRAMME FEATURES
The top line displays the temperature in the tank, alternating (every
4 seconds) with the programme being performed and the current
programme stage.
The
bottom line will show the programme duration “ Duration
XX minutes ”, where XX is the time left before the end of the
programme, in minutes.
7
.1 If DELAYED START (C) is set, until the programme starts the
second line shows the message “ Start in YY hh/mm ”, where YY
are the hours (from 1-12/1-24 depending on model) or minutes
(when less than 1 hour) left before the programme starts.
Any warning messages (e.g. " No salt ”) will appear on the DISPLAY
(G) during the washing stage, alternating with the time left to the end
of the programme.
If the function 3/1 PRODUCTS function (only available on some
models) is set, the no salt and no rinse aid warning messages do
not appear.
7
.2 INTERRUPTING A PROGRAMME
To interrupt a programme, press the START/PAUSE button (F)
again and keep it pressed until “ Pause ” appears on the bottom line
of the DISPLAY (G) .
To restart the programme, repeat this operation until " Duration XX
min ” reappears on the bottom line of the display .
Opening the door also cuts out the programme in progress,
but this is not recommended , since water splashes or gusts of
steam might escape. When the door is closed the programme
restarts automatically, even it was interrupted by pressing the
START/PAUSE button (F) .
EN Instructions for the User