background image

Contents 

 

 

 

1

 

 
   

1.

 

Safety and operating instructions __________________________ 2

 

2.

 

Installation and hook-up _________________________________ 11

 

3.

 

Description of the controls _______________________________ 17

 

4.

 

Operating instructions __________________________________ 27

 

5.

 

Cleaning and maintenance ______________________________ 44

 

6.

 

Troubleshooting _______________________________________ 51

 

 

 

 

 

Thank you for choosing one of our products. 
You are advised to read this manual carefully; it contains all the 
information you need about the right conditions for the proper, safe use of 
your dishwasher. 
The individual sections are laid out to provide you with a step-by-step 
guide to all your appliance's functions; the texts are easy to understand 
and are complete with detailed illustrations. 
Recommendations are given for the correct use of the baskets, spray 
arms, containers, filters, washing programs, and for operating the controls. 
Following the cleaning instructions provided here will keep your 
dishwasher's performance at peak levels in the long term. 
This user-friendly manual will provide answers to all your questions about 
use of the dishwasher. 

 
 
 

 

INSTALLATION INSTRUCTIONS: these are intended for the 

qualified 

technician

 who must carry out the installation, hook-up and testing of the 

appliance. 

 

 

USER INSTRUCTIONS: these consist of recommendations for using the 
appliance, a description of its controls and of the correct cleaning and 
maintenance procedures. 

 

Содержание DF13FAB3CR





















































Отзывы: