Use
13
ENENEN
Clock format settings menu
The clock format can be set after turning the
appliance on for the first time:
1. Open the settings menu and select
SE01
.
2. Move the lever to select the desired
format (12-hour or 24-hour clock).
3. Move the lever to the central position
and press (
OK
) to confirm.
The format will blink for 2 seconds and
the setting will then be saved.
How to change the time:
1. Make sure that the desired clock format
(12h or 24h) has been set as described
above.
2. Keep the lever pressed in the central
position for 3 seconds: the display will
start to flash.
3. Change the hour and minute as
indicated in section “3.2 First use”.
Water settings menu (hard/soft water)
The type of water being used can be set by
selecting one of the three available levels:
HARD, MEDIUM
and
SOFT.
1. Open the settings menu and select
SE02
:
By default, the screen will show
HA02
(medium).
2. Move the lever up (
+
) or down (
-
) to set
the desired level:
HA01
(soft),
HA02
(medium) and
HA03
(hard).
3. Move the lever to the central position
and press (
OK
) to confirm.
The selection will blink for 2 seconds and
the setting will then be saved.
Audible signal settings
You can disable the audible signals as
follows:
1. Open the settings menu and select
SE03
.
2. Move the lever up or down until you see
the word
OFF
on the display.
3. Move the lever to the central position
and press (
OK
) to confirm.
The selection will blink for 2 seconds and
the setting will then be saved.
The clock format is selected only
once and is then saved from that
moment on.
