58
Instructions for the user
10.4 Removing the internal glass panels
The glass in the door should always be kept thoroughly clean. To facilitate cleaning, it is possible to
remove the door (see 10.2 Removing the door) and place it on a canvas, or open it and lock the hinges
in order to extract the glass panels. The glass panels of the door can be completely removed by following
the instructions provided below.
Warning: before removing the glass panels, make sure that at least one of the door's hinges has been
locked in the open position as described in chapter “10.2 Removing the door”. This operation may have
to be repeated during the glass removal process if the door is accidentally freed.
Removing the internal glass panel:
• Remove the internal glass panel by pulling the rear part
gently upwards, following the movement indicated by the
arrows (1).
• Pull upwards the glass panel front (2). Doing this detaches
the 4 pins attached to the glass from their slots in the oven
door.
Removing the middle glass panels:
• Remove the middle glass panels by lifting them upwards,
following the movement indicated by the arrows (1).
• Pull upwards the glass panel front (2).
Cleaning:
It is now possible to clean the external glass panel and the
panels removed previously. Use absorbent kitchen roll. In case
of stubborn dirt, wash with a damp sponge and neutral
detergent.
Replacing the glass panels:
• Replace the panels in the reverse of the order in which they
were removed.
• Reposition the internal glass panel, taking care to centre
and insert the 4 pins attached to the glass into their slots in
the oven door by applying slight pressure.
