Smeg CWC601D, Руководство пользователя

Страница: 19 / 22

17
TOTAL PUMP-OUT AT THE END OF THE DAY
The dishwasher is able to perform an automatic cleaning cycle at the end of the day.
Press the button;
“UnLo”
and the duration appear
on the display.
Confirm by pressing ; light
L2
turns orange
.
At the end of the pump-out, the appliance sets in
“
OFF
” status.
After a total pump-out the filters should be cleaned as described above.
Never switch the dishwasher off with water in the tank; pump out first.
11 MAINTENANCE AND CLEANING
Although no particular scheduled maintenance is required, users are advised to have the dishwasher checked by a
specialist technician twice a year.
N.B.:
the manufacturer accepts no liability for wilful damage or damage deriving from carelessness, neglect, failure
to comply with instructions, regulations and standards or incorrect connections.
11.1 Daily cleaning
The dishwasher has
IPX4
protection, but the use of direct water jets for cleaning is
forbidden.
Cleaning the filter during the day
In case of particularly heavy-duty working conditions, the filter should be cleaned every 30-40 cycles, keeping the
machine in operating conditions; to do this, carry out the “partial tank pump-out” routine (program “P0”).
Press the button, and hold it down, until
“P0”
and
the duration of
1’
appear on the display.
Confirm by pressing ; light
L2
turns orange
.
At the end of the pump-out the word
“End”
flashes on
the display. The display returns to showing
“P1”
. Close
the door again to start filling the tank prior to
performance of a new wash cycle.