181300
Fault:
Cause/Remedy
The appliance does not
operate after connection to the
mains:
• Check if there is power in the socket and if the appliance is
switched on.
Cooling system operates
continuously without
intermittent stoppages:
• Ambient temperature too high.
• Frequent opening of the door, door open too long.
• Door not closed properly (particle between door gasket, sagged
door, check gasket sealing, etc...).
• Excessive quantity of fresh food inserted at once.
• Refrigerator probe (A) is clogged with fresh food. Relocate the
food to provide air circulation around the probe (certain models
only).
• Check air circulation for suf
fi
cient cooling of the compressor, and
clean the condenser.
Excessive ice formation at the
rear interior wall of the freezer:
• Frequent opening of the door, door open too long.
• Inserting hot food in the freezer.
• Food or dish is touching the rear interior panel of the refrigerator.
• Bad door sealing; clean or replace the gasket if dirty or damaged.
Water dripping from the
appliance:
• Drain outlet is clogged, drain water drips past the collection
groove.
• Clean the clogged outlet using plastic straw.
• Thaw thick ice deposits manually (see chapter Defrosting).
Red signal light
fl
ashing (only
freezer):
•Frequent opening of the door, door open too long.
• Door not closed properly (particle between door gasket, sagged
door, damaged gasket, etc...).
• Excessively long power failure.
• Excessive quantity of fresh food inserted at once.
• The
condenser
on the rear wall must always be clean and free of
dust or kitchen fumes deposits, therefore clean the dust periodically
with non-metallic brush or vacuum cleaner..
• Clean also the
drip pan
above the compressor. If you removed
the pan, please make sure you replace it to the same position, and
check that it is in completely horizontal position!
• Ice and/or frost deposits exceeding 3-5 mm increase energy
consumption, so you need to remove them regularly (with the
exception of the NO FROST model). Do not use sharp pointed
objects, solvents or sprays.
• After cleaning switch the appliance on and reload the food.
22
Troubleshooting guide
